Welcome to POWER-Up User’s Guide documentation!¶
Version: | 2.0 |
---|---|
Date: | 2018-03-26 |
Document Owner: | OpenPOWER POWER-Up Team |
Authors: | Irving Baysah, Rolf Brudeseth, Jay Carman, Ray Harrington, Hoa Ngo, Nilesh Shah |
- 1. Document Preface and Scope
- 2. Release Table
- 3. Introduction
- 4. Prerequisite Hardware Setup
- 5. Installing the POWER-Up Software
- 6. Creating the Config File
- 7. Running the POWER-Up Cluster Deployment Software
- 8. Running the POWER-Up Software Installation Software
- 9. Creating Software Install Modules
- 10. Running the PowerAI Enterprise Software Install Module
- 11. Cluster Configuration File Specification
- 12. Cluster Inventory File Specification
- 13. Multiple Tenant Support
- 14. Developer Guide
- 15. Building the Introspection Kernel and Filesystem
- 16. Appendix - A Using the ‘pup’ Program
- 17. Appendix - D Example system 1 - Basic Flat Cluster
- 18. Appendix - E Example system 2 - Basic Cluster with High Availability Network
- 19. Appendix - F Detailed POWER-Up Flow (needs update)
- 20. Appendix - G Configuring Management Access on the Lenovo G8052 and Mellanox SX1410
- 21. Appendix - H Recovering from POWER-Up Issues (needs update)
- 22. Appendix - I Using the ‘teardown’ Program